Measuring just 115mm x 48mm x 27mm this compact "Five-in-One" DALI / PWM controller conforms to the latest DALI Protocols (IEC26386).  Using just the "Set" button, the unit can be adjusted to control single colour, dual white (CCT), tri-colour (RGB), quad-colour (RGBW) and RGBW+CCT 12v or 24v LED products.  To set the control mode simply toggle the set button which will change the colour of the adjacent indicator light to show White for Single colour mode, Yellow for Dual White mode, Red for Tri-Colour (RGB) mode, Green for Quad Colour (RGBW) mode and Blue for Five Channel (RGB+CCT) mode.

Each of these modes will take up 1 x DALI address up to 5 x DALI addresses if you set the controller into RGB+CCT mode.  Each channel is rated a 6A however the total combined load over all five channels should not exceed 15A maximum load.  The controller will accept a 12v or 24v DC constant voltage input.
Please follow the included instructions for setting your DALI address.

Feature

1. 2.4GHz RF Receiver
2. Compatible with Mi-Light / MiBoxer handsets and wall panels
3. Smartphone Compatible
4. 30m signal transmitting and synchronization between receivers
5. Quick and easy to pair with handsets and wall panels

Technical Specification
Manufacturer:    Mi-Light / MiBoxer
Product Type:    Controller / Receiver
IP Rating:    IP20 Non-Waterproof
Guarantee Period:    5 Years
Input Voltage;    100v - 240v AC
Output Voltage:    12v / 24v DC
Connectivity:    DALI protocols
Size    :L115mm x W48mm x H27mm
Dimmable:    No
Wireless Range:    Up to 30 metres
Transmitting Power:    6dBm
Operation Frequency:    2.4GHz
Operating Temp:    -20~60°C
Total Output:    Max15A
Output Max:    6A/Channel