This dual colour, wall mounted wall panel from our range or Sunricher products is a high quality RF transmitter featuring a simple push switch design.  There are two switches, one to turn on and off your lighting, the other to adjust the colour temperature from cool to warm white.
When the top half of the left had switch is toggled the lighting will switch on or off, by pressing and holding the lower half of the switch, full dimming between 0-100% of your LED lighting can be achieved.  The right hand switch smoothly adjusts the colour temperature between warm and cool white.
As the wall panel is powered by an internal long life battery, it can be fitted almost anywhere with the fixing kit supplied.  This high quality controller is ideal for installing in the domestic or commercial market where a reliable, high quality product is required.  Ready to go out of the box, simply pair the unit with a compatible Sunricher receiver and you are ready to control your dual colour LED Lighting products.  The wall panel has an attractive white glass front panel and it can paired to any number of receivers and operated within 20m of the receiver units.
Note: Each receiver can be paired with up to eight controllers.

Technical Specification
Product Code:    SR2833KCCT
Product Packed:    Gift box
Product Type:    Controller
Colour:    White
IP Rating:    IP20 Non-Waterproof
Guarantee Period:    5 Years
Input Voltage:    Battery Powered
Connectivity:    RF
PCB Weight:    Not Applicable
Size:    86 x 86 x 14mm
CRI Rating (greater than):    CRI >80
Dimmable:    Yes
LED Type:    Not Applicable
Average LED life Hrs:    30,000
Colour Temperature Variation:    IP20 No
Power Factor >:    Not Applicable
Wireless Range:    Up to 20 metres
Continuous Operation:    Not suitable for 24/7 continuous use
Relative Humidity:    8% to 80%
Operation Frequency:    869.5 / 434MHz
Battery Type:    1 x 3V CR2430 button battery